Skip to content
lastroll

Battery · 3V total (2 × 1.5–1.55V)

Pentax ME Super Battery: LR44 or SR44, Checking It, and the Silent Dead-Battery Trap

The Pentax ME Super takes two LR44 or SR44 cells. How to check them, why it can shoot blank frames with dead cells, the 125X backup speed, and fast battery drain.

Reviewed Nov 21, 20262 min read

The short answer

The Pentax ME Super takes two 1.5V button cells: LR44 (alkaline) or SR44 (silver oxide). They’re the same size and sold everywhere. The chamber is in the base; open the cover with a coin and follow the polarity diagram inside.

Buy SR44 if you can. As our LR44 vs SR44 guide explains, silver oxide holds its voltage almost flat until it’s nearly empty, so the meter stays accurate. LR44s work but sag as they age.

What works without batteries

Only two settings: the mechanical 125X (1/125s) and B. Everything else, including the meter and auto exposure, needs power.

The trap: camera-wiki warns that on AUTO or M with dead cells, the ME Super’s shutter still fires, at a fixed, uncalibrated speed, and sounds normal. You can shoot a whole roll of blank or badly underexposed frames without noticing. Always watch for the LEDs in the finder.

How to check the batteries

Half-press the shutter button in AUTO or M:

What you see What it means
Steady LEDs Good cells
Flickering speed LEDs Replace them soon
No LEDs at all Dead or badly fitted cells

Batteries dying in a day or two?

If fresh cells go flat almost immediately, iFixit says the meter switch under the shutter button probably isn’t opening, so the meter stays on. That needs a repair; new batteries won’t fix it.

Spare cells

Two SR44s are small enough to keep in a camera bag. Battery Equivalents lists 357, 303 and S76 as silver-oxide equivalents and A76 and AG13 as alkaline ones, so any of those names will fit.

The Pentax K1000 battery page covers the K1000, which needs its cell only for the meter. For the Pentax lens system, see our K-mount lenses guide.

FAQ

What battery does the Pentax ME Super take? Two 1.5V LR44 or SR44 button cells.

Does the Pentax ME Super work without batteries? Only at 125X (1/125s) and B.

Why are my ME Super photos blank? Check the batteries. With dead cells the shutter still fires on AUTO, at a fixed speed, and sounds normal, per camera-wiki.

Should I use LR44 or SR44 in the ME Super? Either fits. SR44 keeps the meter accurate for longer.

How do I check the battery? Half-press the shutter in AUTO or M. Steady LEDs mean good cells; flickering LEDs mean replace them soon.

Cameras that use it

Sources

  1. Pentax ME Super instruction manual — Butkus.org
  2. Pentax ME Super — Camera-wiki.org
  3. Pentax ME Super Troubleshooting — iFixit
  4. Battery type SR44: compatible cameras — ausgeknipst
  5. LR44, AG13, SG13, LR1154, SR44, SR44SW, 303, 357, A76 equivalents — Battery Equivalents

Last reviewed Nov 21, 2026.