Is the Canon EOS-3 worth buying?
Yes, if you want the most capable autofocus film camera that takes today’s EF lenses. The EOS-3 has a 45-point AF system, shutter speeds to 1/8000s, evaluative and spot metering, and E-TTL flash. Ken Rockwell says it works with every EOS lens, including USM and IS lenses. Wikipedia notes its AF system went on to Canon’s pro bodies, and no non-1-series Canon matched it until 2012.
Its party trick is eye-controlled focus: the camera watches which AF point you look at and focuses there. Ken Rockwell and 35mmc both found it surprisingly reliable. Wikipedia adds that it only works after calibration and can be confused by glasses.
The downsides: it’s big and heavy (about 850g with battery and film, per 35mmc), the shutter is loud, and everything runs on one 2CR5 battery.
Buy one if you already shoot Canon EF lenses on digital and want a film body that uses them fully. Skip it if you want a small, quiet or battery-free camera. The Nikon N80 is lighter, and the Canon AE-1 Program is a classic manual-focus option.
Key specs
| Spec | Canon EOS-3 |
|---|---|
| Type | 35mm autofocus SLR |
| Made | 1998–2007 |
| Mount | Canon EF |
| Autofocus | 45 points (can be limited to 11); One-Shot, AI Servo, manual; eye control |
| Shutter | Vertical focal-plane, electronic; 30s–1/8000s + B |
| Flash sync | 1/200s; high-speed FP flash; E-TTL with EX Speedlites |
| Exposure | Program (shiftable), Tv, Av, manual, DEP, bulb |
| Meter | 21-zone evaluative, partial, spot, multi-spot, center-weighted; EV 0–20 |
| Film speed | ISO 6–6400 by hand; DX 25–5000 |
| Compensation | ±3 EV in 1/3 steps; bracketing; up to 9 multiple exposures |
| Finder | 97% coverage, 0.72x; nine interchangeable screens |
| Drive | 4.3 fps (3.3 fps in AI Servo); up to 7 fps with PB-E2 |
| Battery | 1 × 2CR5 |
| Size / weight | 161 × 119.2 × 70.8mm; 780g body without battery |
How it works
The EOS-3 works much like a Canon DSLR. Choose a mode with the mode button and dials, and pick AF points manually, automatically or with your eye.
Eye control needs calibration first. Ken Rockwell describes the process: set the switch beside the hot shoe to CAL, choose one of three memory slots, then look at each blinking point in turn and hold the shutter button until it beeps. A long series of beeps means it failed. He suggests calibrating in both horizontal and vertical orientation and in different light.
Film loads automatically: pull the leader to the mark, close the back and the camera advances to frame 1. Rewind takes about 6.5 seconds for a 36-exposure roll, per Bob Atkins, with a quieter mode available.
Battery
The EOS-3 takes one 2CR5 6V lithium battery, which sits in the grip. Ken Rockwell and 35mmc both report about 50 rolls per battery.
- Battery check: the button is behind a small door on the side. A bar graph on the top LCD shows the level.
- Without a battery: nothing works. The shutter, motor, meter and AF are all electronic.
- PB-E2 booster: takes 8 AA cells or an NP-E2 rechargeable pack and raises the drive to 7 fps. Bob Atkins says alkaline AAs give about 5–6 fps. Ken Rockwell found the booster makes the camera very heavy (about 1.4kg).
Lenses
All Canon EF lenses work, including USM and IS lenses, per Ken Rockwell. Bob Atkins notes that EF lenses up to 1200mm cause no mirror vignetting. EF-S lenses, made for crop-sensor digital bodies, aren’t covered by our sources, so don’t assume they’ll mount.
Known issues
The sources we checked don’t report a common mechanical failure, and 35mmc’s reviewer took one through 25 countries without a problem. What to know:
Eye control isn’t for everyone. Wikipedia says glasses, and sometimes contact lenses, can confuse it. It also has to be calibrated per user. If it doesn’t work for you, select points by hand.
Small details. Ken Rockwell found the top LCD’s illuminator too dim to be useful, and says pressing the mode button blanks the finder display. He and 35mmc both call the shutter loud.
Build: opinions differ. Canon says it has the same dust and moisture protection as the EOS-1N, and 35mmc praises its gaskets. Ken Rockwell found the outside plasticky.
What to check on a used EOS-3
- Battery. Fit a fresh 2CR5 and press the battery check. The bar graph should be full.
- Shutter. Fire at 1/8000s, 1/60s and 30s. The mirror should cycle cleanly every time.
- Autofocus. Try One-Shot and AI Servo with an EF lens. The camera should lock focus quickly and confirm with a beep (unless the beep is turned off).
- Eye control. Run a calibration. A short beep at each point means it’s working.
- Film transport. Load a roll, or watch the camera advance and rewind with an old leader.
- Displays. Check the finder readout and top LCD for missing segments.
Who it’s for, and alternatives
Good fit: Canon digital shooters who want a film body for their EF lenses, sports and action shooters, and anyone who wants spot and multi-spot metering on film.
Not ideal: anyone who wants a light, quiet or mechanical camera.
- Nikon N80: a lighter autofocus film SLR for Nikon F-mount lenses.
- Canon AE-1 Program: manual focus, FD mount, a very different experience.
- Canon A-1: Canon’s 1978 multi-mode FD camera.
- Nikon F3: a manual-focus pro body, if you’d rather focus yourself.
Used prices
We haven’t checked enough recent sold listings to give a reliable range yet.
FAQ
Do modern Canon EF lenses work on the EOS-3? Yes. Ken Rockwell says it’s compatible with every EOS lens, including USM and IS.
What battery does the Canon EOS-3 use? One 2CR5 6V lithium. About 50 rolls per battery, per owners.
Does eye-controlled focus work with glasses? Sometimes not. Wikipedia says glasses, and occasionally contacts, can confuse it. You can always select AF points by hand.
How fast is the EOS-3? 4.3 frames per second on its own, or up to 7 fps with the PB-E2 booster and a rechargeable pack.
Is the EOS-3 weather sealed? Canon says it has the same dust and moisture protection as the EOS-1N.