Skip to content
lastroll

Nikon · SLR · 35mm

Nikon F3 35mm Film Camera: Is It Worth Buying? F3 vs F3HP, LCD, Battery and What to Check

Nikon F3 buyer's guide: Nikon's pro SLR from 1980 to 2001, F3 vs F3HP and other variants, the LCD, its batteries and 1/60 backup, lens rules, and a checklist.

Reviewed Nov 21, 20266 min read

Is the Nikon F3 worth buying?

Yes, if you want a pro Nikon you can shoot every day. The F3 gives you aperture-priority auto, a viewfinder with virtually 100% coverage, interchangeable finders and screens, and a very smooth ball-bearing film advance. Nikon made it from 1980 until about 2001 and sold more than 751,000 by 1992, so there are plenty to choose from and repairers know them well.

It’s still an electronic camera. Without batteries you get one mechanical backup speed (about 1/60s), no meter and no LCD. The LCD in the finder is the part most often reported to fade with age. And the F3 has quirks: flash syncs at only 1/80s, and the flash mounts on the rewind knob rather than a normal hot shoe.

Buy one if you want a durable aperture-priority body with access to manual-focus Nikkors. Get the F3HP if you wear glasses. Skip it if you want a camera that fully works without batteries. The Nikon F2 or FM2 are mechanical.

Key specs

Spec Nikon F3 / F3HP
Type 35mm SLR, professional system body
Made 1980–about 2001 (sources differ on the last year)
Mount Nikon F; AI or later, with an aperture ring
Shutter Horizontal titanium-foil focal-plane, quartz-timed; 8s–1/2000s, plus X, B, T
Backup Mechanical release at about 1/60s, no batteries needed
Flash sync 1/80s; TTL flash with SB-11, SB-12, SB-16A and others
Exposure Aperture-priority auto; manual
Meter 80/20 center-weighted; EV 1–18 (ISO 100, f/1.4)
Film speed ISO 12–6400, set by hand
Compensation ±2 EV in 1/3 steps; AE lock button
Finder Interchangeable; virtually 100% coverage; 0.8x (F3), 0.75x (F3HP)
Screens Type K standard; about 20 others
Battery 2 × SR44/LR44, or 1 × CR-1/3N
Drive MD-4 motor drive: 4 fps, or 6 fps with the mirror locked up
Size / weight 148.5 × 96.5 × 65.5mm, about 700–715g (F3); 760g (F3HP)

How it works

Set the shutter-speed dial to A and choose the aperture on the lens. A light touch on the release wakes the meter. The LCD at the top of the finder shows the speed the camera will use. The ADR window above it shows the aperture set on the lens, read straight off the lens barrel.

In manual, the LCD shows the speed you set plus + and − signs to guide you toward the metered exposure. Nikon’s chronicle says the meter reads light through a mirror with about 50,000 tiny pinholes, and the spec sheet notes that changing finders or screens doesn’t change the reading.

The LCD has no backlight. It’s lit by a small window on the front of the prism. In dim light, press the illuminator button on the prism. Ken Rockwell says the power switch can be left on, because the meter only wakes when you touch the release.

Battery

The F3 takes two SR44 (silver-oxide) or LR44 (alkaline) cells, or one 3V CR-1/3N lithium. Nikon’s chronicle says the backup release was added partly because 1.55V silver-oxide cells weren’t sold everywhere when the F3 launched.

  • Without batteries: push the mechanical release lever on the front to fire at about 1/60s, whatever the dial says. T also works. Ken Rockwell gives the backup speed as 1/80s; the spec sheet, Wikipedia and Nikon all say 1/60s.
  • With the MD-4: the motor drive powers the body from its own 8 AA cells, so the button cells last longer.
  • Long life, but test them: Ken Rockwell says a pair lasts years, but he also had two new LR44s fail to fire the shutter after 28 months in the camera. Fit fresh cells before you judge a used F3.
  • Cold: the optional DB-2 holder runs the camera from two AA cells on a cord.

Known issues

LCD fading. Wikipedia calls the LCD one of the F3’s few problem areas: contrast drops, the segments blur and some eventually die. The camera still works without it if you set speeds by the dial. Ken Rockwell says he has never seen one go bad, so this isn’t universal, but check the one you’re buying.

Flickering illuminator. Ken Rockwell says the illuminator switch often gets dirty and makes the light flicker.

No AE lock on early bodies. Wikipedia notes that early F3s often lack the AE lock button. Nikon later fitted a redesigned part.

Odd variants. The F3P’s finder doesn’t swap with the others. The F3AF needs its own finder and one of two special AF lenses. The F3H is a collector’s item with a fixed pellicle mirror. If a listing is cheap and says “F3AF” or “F3P,” know what you’re getting.

What to check on a used F3

  1. LCD. Fit fresh SR44s and half-press. The speed should appear in dark, crisp segments. Faint or missing segments mean the LCD is aging.
  2. Illuminator. Press the button on the prism. The light should be steady.
  3. Auto and manual. Fire on A at a bright and a dark reading, then at several manual speeds. The mirror must come back every time.
  4. Backup release. Take the cells out and fire with the mechanical lever.
  5. ADR window. With a lens fitted, check the aperture number is readable.
  6. Finder. Lift the prism off. Check the screen is clean and the contacts are bright.
  7. Battery chamber and seals. Look for corrosion and crumbling foam.

F3 vs F3HP

The F3HP uses the DE-3 high-eyepoint finder. Wikipedia says you can see the whole frame from about 2.5cm back from the eyepiece, which makes it much easier with glasses. It’s taller (101.5mm) and heavier (760g), and the magnification drops slightly to 0.75x. Otherwise the cameras are the same, and the finders swap. Ken Rockwell says the HP came along a couple of years after the original; Nikon dates it to 1982.

Lenses

AI and AI-S Nikkors work fully, and so do AF lenses with an aperture ring (focused by hand). G and AF-P lenses don’t work, because they have no aperture ring. Ken Rockwell says pre-1977 non-AI lenses mount and meter stopped down, unless they’ve been converted to AI. Thanks to mirror lock-up, the F3 can also take old fisheye and ultrawide lenses that stick into the mirror box. E-type lenses with an electronic diaphragm only shoot wide open.

Who it’s for, and alternatives

Good fit: anyone who wants a pro-grade aperture-priority body, a 100% finder and a huge choice of screens, finders and lenses.

Not ideal: anyone who needs fast flash sync, a normal hot shoe, or full mechanical operation.

  • Nikon F2: the mechanical pro body the F3 replaced.
  • Nikon FE2: smaller, aperture priority with a 1/4000s shutter and 1/250s sync.
  • Nikon FM2: fully mechanical, manual only.
  • Canon F-1: Canon’s mechanical pro body of the 1970s.
  • Pentax LX: Pentax’s pro body of the same era, with mechanical fast speeds.

Used prices

We haven’t checked enough recent sold listings to give a reliable range yet.

Comparing with the FM2? See Nikon FM2 vs F3.

FAQ

Does the Nikon F3 work without batteries? Partly. The mechanical release fires the shutter at about 1/60s, and T works. The meter, LCD, auto mode and all other speeds need power.

What battery does the Nikon F3 use? Two SR44 or LR44 button cells, or one 3V CR-1/3N lithium.

What’s the difference between the F3 and F3HP? The F3HP has the DE-3 high-eyepoint finder, which shows the whole frame with your eye further back. It’s better with glasses. The bodies are the same.

Can I use autofocus lenses on the F3? AF Nikkors with an aperture ring work, focused by hand. G-type and AF-P lenses don’t.

Why is my F3’s LCD faint? Try fresh batteries first. If it’s still faint, the LCD is aging, which Wikipedia lists as a common F3 problem. The camera still works without it.

Related cameras

Guides

Sources

  1. Nikon F3 — Wikipedia
  2. Nikon F3/F3HP specifications — York University archive
  3. Nikon F3 HP review — Ken Rockwell
  4. Debut of Nikon F3 — Nikon Camera Chronicle

Last reviewed Nov 21, 2026.