Is the Mamiya RB67 worth buying?
Yes, if you want large 6×7 negatives from a camera that needs no batteries and that you’ll mostly use on a tripod or in a studio. The RB67 is a modular, fully mechanical system. The body, lens, viewfinder, film back, and rotating back adapter are all separate parts. That modularity is the appeal: you can swap backs mid-roll, rotate the back between landscape and portrait without turning the camera, and focus very close using the built-in bellows.
Every lens has its own leaf shutter, so flash syncs at every speed up to 1/400s. That makes it a natural fit for portraits and studio work.
The obvious downside is weight. Wikipedia gives about 2.7kg (5.9 lb) with the 90mm lens. Camera-wiki says it’s often called unsuitable for handheld use, though a good strap makes it workable. The other downside is age: most problems now are light seals, worn backs, and lens shutters that need servicing.
Buy one if you shoot portraits, still life, or landscapes and like a slow, deliberate camera. Skip it if you want to hike light or shoot quickly handheld. A Pentax 67 is the more mobile 6×7 option.
Key specs
| Spec | Mamiya RB67 |
|---|---|
| Type | Modular medium-format SLR |
| Models | Professional (1970), Pro-S (1974), Pro-SD (1990) |
| Film | 120 (10 frames 6×7) or 220 (20 frames) |
| Formats | 6×7 standard; 6×4.5 and 6×6 backs; 6×8 on Pro-SD |
| Shutter | Seiko leaf shutter in each lens, 1s–1/400s + T |
| Flash sync | All speeds |
| Focusing | Bellows on the body, 46mm extension |
| Back | Rotating (“Revolving Back”) adapter |
| Mount | RB bayonet with locking ring; 54mm throat (Pro/Pro-S), 61mm (Pro-SD) |
| Metering | None built in; metered prisms and chimneys available |
| Battery | None needed |
| Weight | About 2.69kg (5.9 lb) with 90mm f/3.8 |
The RB doesn’t have a focal-plane shutter. You cock the lens shutter and the mirror together with the big lever on the side of the body. Because the shutter and film advance aren’t linked, deliberate multiple exposures are possible. The method changed on the Pro-S, which added a multiple-exposure lever on the back.
Pro, Pro-S or Pro-SD?
- RB67 Professional (1970): the original. Its lenses are single-coated. Bill Rogers, a repairer, notes that original Pro bodies won’t accept the later Pro-S revolving adapters, so check that the parts match.
- RB67 Pro-S (1974): the most common body, sold for over 15 years. It adds orientation indicators and revised interlocks. On a Pro-S roll back, the shutter won’t release until the film has been advanced, which helps prevent accidental double exposures and blank frames.
- RB67 Pro-SD (1990): a larger 61mm lens mount for the newer K/L and L lenses, plus support for 6×8 backs.
Lens compatibility:
| Lens series | Pro / Pro-S | Pro-SD |
|---|---|---|
| Original (1970, single-coated) | Fits | Needs adapter |
| C (1974, multi-coated) | Fits | Needs adapter |
| K/L | Remove the rear ring adapter | Fits directly |
| L | Check before buying | Fits |
Owners on Photrio report that nearly all RB lenses mount on every RB body. The exceptions they name are the 75mm shift lens, which needs the Pro-SD’s larger mount, and the 500mm APO, where reports conflict. Ask the seller before pairing an L lens with a Pro or Pro-S.
For most people, a Pro-S with C or K/L lenses is the value choice. Buy a Pro-SD if you want the newest bodies and backs.
Battery
The RB67 needs no battery. It’s fully mechanical. Batteries are only needed for metered finders and motorized film backs. The CdS metered prism and chimney have a plain on/off switch, so they drain their cells if left on. Camera Dojo notes most owners use a handheld meter instead.
Known issues
Light leaks. This is the most common RB67 complaint. Bill Rogers notes a single film back has ten light seals in five different lengths. Pro and Pro-S backs rely on foam, which turns sticky or crumbles. Camera Dojo notes that Pro-SD backs use mechanical light blocks instead, but the mirror foam ages in every body. Precut seal kits are available, and the job is tedious but not complicated.
Interlocks and back problems. Common symptoms: the shutter release only goes partway, the camera fires in one back orientation but not the other, or the advance lever won’t move. Rule out the simple causes first. The dark slide must be out, the mirror cocked, the film advanced, and the back fully clicked into position. After that, check the pins between body and back. They get bent or dirty when people rest the camera on them.
Revolving adapter wear. From the bench, Bill Rogers sees broken pins (the wind actuator and double-exposure prevention pins), stiff rotation that needs cleaning and light relubrication, and broken detent springs. If you have a wind or back problem, check the revolving back first, since it’s the interface between body and back.
Lens shutters. Each lens has its own Seiko shutter, so each lens can have its own problem. Old grease can make slow speeds drag (overexposing) or the shutter hesitate. Fixing it means a lens service, one lens at a time.
Lens glass. Check for haze, fungus, and balsam separation. A lens that won’t come off usually just isn’t fully cocked. The manual says both the mirror and the shutter must be cocked before the lens will release.
Parts are getting scarce. Camera Dojo reports that Precision Camera Works, which described itself as the North American repair center for Mamiya legacy products, posted in March 2026 that it was pausing RB67 Pro and Pro-SD body and lens work. Independent shops still list RB67 repairs. We couldn’t confirm the PCW notice on its own site, so check with any shop before sending a camera.
What to check on a used RB67
- Body version. Check the front: Professional, Professional S, or Professional SD.
- Every lens. Fire each one at 1s, 1/8, and 1/400. The 1s should sound like a full second, and the speeds should sound distinctly different.
- Back fit. Remove and refit the film back. It should seat firmly, and the dark slide should slide in and out without forcing.
- Rotation. Turn the back between horizontal and vertical. It should click into each position without binding.
- Seals. Look at the foam on the back, the revolving adapter, and the mirror area.
- Film counter. Run a test roll (or backing paper) through each back. The counter should advance and stop at the end.
- Bellows. Rack it fully out and back. Check for stiffness and, in a dark room with a light inside, for pinholes.
- Focus knob. It should turn smoothly. A cracked or very stiff knob is hard to fix with no parts available.
Used prices
We don’t have enough recent sold data to give a reliable range yet.
Who it’s for, and alternatives
Good fit: studio, portrait, and landscape shooters who want big negatives, flash sync at every speed, interchangeable backs, and no batteries.
Less good: hikers, street shooters, and anyone who wants a quick handheld camera.
- Pentax 67: the same frame size in a 35mm-style body. It’s more mobile and has faster lenses, but it’s battery dependent, syncs flash at 1/30s, and has no interchangeable backs.
- Mamiya RZ67: the electronic successor, with the same concept.
- Mamiya 645: a smaller format and much lighter.
- Yashica Mat-124G: a far lighter and cheaper 6x6 TLR with a fixed 80mm lens. Also mechanical; its battery runs only the meter.
FAQ
Does the Mamiya RB67 need a battery? No. The camera is fully mechanical. Only metered finders and motorized backs use batteries.
What’s the difference between the RB67 Pro-S and Pro-SD? The Pro-SD (1990) has a larger 61mm mount for K/L and L lenses and supports 6×8 backs. Owners on Photrio and Photo.net report using Pro-SD backs on Pro-S (and even Pro) bodies without trouble. Reported misfits came down to a Pro-S back adapter that wasn’t fully unlocked. The film inserts themselves aren’t interchangeable between models.
Why won’t my RB67 shutter release? Check that the dark slide is out, the mirror is cocked, the film is advanced, and the back is fully seated. Then check the pins between the back and the body.
Is the RB67 too heavy to use handheld? It’s about 2.7kg with the 90mm lens. Many people do shoot it handheld with a good strap, but it’s designed for a tripod.
Does the RB67 have a light meter? Not built in. You can add a metered prism or chimney, but most owners use a handheld meter.