Skip to content
lastroll

Yashica · TLR · 120/220

Yashica Mat-124G: Is It Worth Buying? Battery Fix, Meter, Common Faults and What to Check

Yashica Mat-124G buyer's guide: the 6x6 TLR's Yashinon lens and Copal shutter, fixing the mercury battery, sticky seals and slow speeds, 124 vs 124G, and a checklist.

Reviewed Nov 20, 20267 min read

Is the Yashica Mat-124G worth buying?

Yes, if you want the simplest, cheapest way into 6x6 medium format. It’s a twin-lens reflex: you look down into a big ground-glass screen through the top lens, and the bottom lens takes the picture on 120 film, 12 square frames a roll. The 80mm f/3.5 Yashinon is a four-element lens that reviewers find sharp, especially stopped down. The shutter, advance and focusing are all mechanical.

The caveats are about age, not design. Check the shutter’s slow speeds and the frame spacing before you pay. Plan on new back seals, because the 124G’s foam goes sticky. And treat the built-in meter as a bonus: it was designed for a mercury cell you can’t buy, and many no longer read correctly.

Buy one if you want a first medium-format camera without buying into a system. Skip it if you need interchangeable lenses, close focusing below 1 m (3.3 ft), or a camera that’s quick to use at eye level. Look at a Mamiya RB67 or Pentax 67 instead.

Key specs

Spec Yashica Mat-124G
Type 6x6 twin-lens reflex
Made 1970–1986
Film 120 (12 exposures) or 220 (24), set by the pressure plate
Taking lens Yashinon 80mm f/3.5, 4 elements in 3 groups; f/3.5–f/32
Viewing lens Yashinon 80mm f/2.8
Shutter Copal-SV leaf, 1s–1/500s + B; self-timer; shutter lock
Flash PC socket with M/X selector; electronic flash on X at all speeds; cold accessory shoe
Meter Coupled match-needle CdS, on when the hood is open; ISO 25–400
Battery 1 × 1.3V mercury (PX625 size), meter only
Focusing Knob on the left; 1 m (3.3 ft) to infinity; 3x flip-up magnifier; sports-finder frame in the hood
Filters Bay I bayonet (Yashica’s “30mm bayonet”), same as many Rolleicords
Size / weight 77 × 148 × 101mm; 1,100g

220 film is no longer made, so leave the pressure plate on 12 and shoot 120.

How it works

Flip up the hood and the meter switches on. Set the film speed on the wheel by the nameplate. Turn the shutter-speed wheel (on the right of the lenses) and the aperture wheel (on the left) until the yellow follower needle in the window on top lines up with the red meter needle. The speed and aperture show in a window above the viewing lens.

One full turn of the crank forward and back advances the film and cocks the shutter. The counter stops at 1 by itself after loading, as long as you line up the start arrow on the backing paper first.

Two habits from the manual: set the self-timer only with the flash selector on X, and fold the hood when you’re done so the meter switches off.

Battery

The meter runs on one 1.3V mercury cell (the manual names Mallory PX-13 type and Eveready EPX-13), the size now called PX625 or MR9. Mercury cells are banned from sale. The compartment is on the left side below the focus knob; Ausgeknipst says the negative end goes inward.

The voltage matters. Ausgeknipst found no evidence that the 124G’s meter compensates for voltage, so a 1.5V cell shifts the reading. It cites owners who measured under half a stop of error with a 1.35V cell and clear errors with 1.5V. Your options:

  • Zinc-air 675 cell in a PX625 adapter. About the right voltage and cheap, but it dries out within weeks once activated.
  • A voltage-reducing adapter (such as the C.R.I.S. MR-9) with a silver-oxide cell. Correct voltage, long life.
  • Have the meter recalibrated for 1.5V, then use a normal cell with a spacer.
  • Ignore the meter and use a handheld meter or a phone app. Many owners do.

Some previous owners have already recalibrated their meter for 1.5V, so test any used camera against a phone app or a handheld meter before you trust it.

Without a battery: the camera works normally. You lose only the meter.

Known issues

Slow speeds running long. Ross Jukes lists sticky or slow shutter speeds, especially the slow ones, among the faults he sees most. Dusty Grain says the shutter isn’t usually a problem, but when it is, it can be hard to find someone to fix it. Either way, a lagging 1s means a shutter service.

Sticky foam seals. Ausgeknipst says Yashica switched from yarn seals on the 124 to foam on the 124G, and that foam breaks down into a sticky, crumbly mess that can glue the back shut. Budget for resealing any 124G that hasn’t had it.

Meter problems. Dead meters, jumpy needles and wrong readings are common. On top of voltage, Ausgeknipst notes the meter averages a wide area and is practically unusable below about EV 8 (indoors, dusk), citing a repairer’s review. On the earlier Mat-124, the meter switch under the hood was the weak point; the 124G got gold-plated switch contacts (the “G”).

Frame spacing. Bob Sara, a former Yashica-trained TLR technician, says uneven spacing between frames points to a gear-timing fault, which a service can fix if the gears aren’t worn. He also warns that cranking repeatedly with an empty take-up spool and no film tension can throw the advance mechanism out of adjustment.

Dim screen. Ross Jukes finds dim or dirty screens common. Ausgeknipst suggests cleaning the mirror and the space between the Fresnel and screen before buying a brighter replacement screen.

Flare. Ausgeknipst and 35mmc’s reviewer both find the Yashinon more prone to flare against the light than a Rolleiflex lens. Use a Bay I lens hood.

What to check on a used Mat-124G

  1. Shutter speeds. Fire every speed from 1s to 1/500 and B. Ross Jukes suggests firing each speed three or four times: it should sound the same every time, and the slow speeds shouldn’t drag.
  2. Blades. With the back open, watch the shutter against a light at a few speeds. The blades should be clean and dry.
  3. Aperture. On B with the shutter held open, turn the aperture wheel. The blades should move crisply to each stop.
  4. Focusing. Rack the knob from close to infinity. It should be smooth, with no grit or wobble.
  5. Finder. Look for a usable image and check the viewing lens for haze.
  6. Taking lens. Shine a torch through it on B. Small dust is fine; haze and fungus aren’t.
  7. Seals and battery chamber. Press a fingertip on the back seals: sticky means resealing. Look for corrosion in the battery chamber.
  8. Film spacing. If buying remotely, ask for a recent roll or scans. Even gaps between frames mean the transport is healthy.

Mat-124 vs Mat-124G

Ausgeknipst compared the original manuals: same lens, same Copal-SV shutter, same ISO 25–400 meter range, same battery, same size and weight.

Mat-124 (1968–1970) Mat-124G (1970–1986)
Trim Chrome Black, gold “G”
Back seals Yarn, usually still fine Foam, usually needs replacing
Meter switch Considered unreliable Redesigned, gold-plated contacts
Battery cover Metal Plastic
Inside No light baffles Light baffles, film-guide roller, film-type reminder on the focus knob

Buy the better copy, not the letter. The 124G is far more common, so it’s easier to find a good one. Ausgeknipst also debunks the claim that the 124G has plastic gears.

Who it’s for, and alternatives

Good fit: first-time medium-format shooters, portrait shooters who like the square, and anyone who meters with a phone or handheld meter anyway.

Less good: anyone who wants interchangeable lenses, close-ups, fast handling at eye level, or a reliable built-in meter.

  • Mamiya RB67: 6x7, interchangeable lenses and backs, bellows close focusing, fully mechanical. Much bigger and heavier.
  • Pentax 67: 6x7 in an SLR-style body with interchangeable lenses. Heavy and battery dependent.
  • Mamiya 645: smaller 6x4.5 frame, interchangeable lenses.
  • Plain Yashica-Mat, Mat-LM or Mat-EM: the same Yashinon lens in most production years and no battery question. Ausgeknipst calls them the cheaper route if you meter externally.

Used prices

Working copies (any listing) sold on eBay US for about $168–$350 from Aug 22 to Nov 20, 2026. That is the middle half of 115 sales, item price before shipping, with parts-only and as-is listings left out.

FAQ

What battery does the Yashica Mat-124G use? A 1.3V PX625-size mercury cell, now banned. Use a zinc-air 675 in a PX625 adapter, a voltage-reducing adapter, or have the meter recalibrated for 1.5V.

Does the Yashica Mat-124G work without a battery? Yes. The battery only powers the meter.

What does the G in 124G stand for? According to Yashica’s own brochure, as quoted by Ausgeknipst, the meter-switch contacts are gold-plated.

Can the Yashica Mat-124G shoot 220 film? It was designed for 120 and 220, but 220 is no longer made. Leave the pressure plate on 12.

Is the Yashica Mat-124G a good first medium format camera? Yes, if the shutter and frame spacing check out. Budget for new seals and plan to meter externally.

Related cameras

Guides

Sources

  1. Yashica Mat-124G instruction manual — Butkus.org
  2. Yashica 6×6 TLR (crank advance), incl. Mat-124 and Mat-124G — Camera-wiki.org
  3. Yashica Mat 124G, 124 and 635 compared — Ausgeknipst
  4. Yashica Mat-124G Review — Ross Jukes
  5. Yashica Mat 124G Review — Dusty Grain
  6. Yashica MAT 124G (and its auxiliary lenses) Review — 35mmc
  7. Yashica Mat 124G troubles (reply from a former Yashica TLR technician) — r/AnalogCommunity
  8. Mamiya 645 — Wikipedia

Last reviewed Nov 20, 2026.