Skip to content
lastroll

Nikon · SLR · 35mm

Nikon F2: Is It Worth Buying? Finders, Battery, Meter Faults and What to Check

Nikon F2 buyer's guide: which F2 you're looking at (DE-1 to DP-12), batteries, the meter faults that matter, a used-copy checklist and alternatives.

Reviewed Nov 20, 20266 min read

Is the Nikon F2 worth buying?

Yes, if you want a fully mechanical, all-metal professional SLR and don’t mind the weight. The F2 was Nikon’s top camera from 1971 to 1980. It was the last all-mechanical professional Nikon. The shutter runs from 1s to 1/2000s on springs and gears, so it fires at every speed with no battery at all.

The body is rarely the problem. The finder is. On an F2, the meter lives in the removable prism head, and there are five different metering heads plus a plain prism with no meter. The head decides what the camera is called, which lenses meter properly, and most of what can go wrong. So buy the finder as carefully as the body.

Buy one if you want a camera that can be serviced for decades and you like a mechanical feel. Skip it if weight matters (it’s around 730g with the plain prism, and more with a metered head), or you want auto exposure.

Key specs

Spec Nikon F2
Type 35mm professional SLR, system camera
Made September 1971 – 1980
Mount Nikon F
Shutter Horizontal titanium-curtain focal-plane, mechanical, 1s–1/2000s + B, T
Long exposures Up to 10s using the self-timer
Flash sync 1/80s
Exposure Manual (DS-series servo units added shutter-priority auto to some heads)
Finders Interchangeable: DE-1 plain prism, DP-1/2/3/11/12 metered, plus action and waist-level finders
Battery 2 × SR44/LR44 in the body base (powers the metered finder only)
Weight About 730g with the DE-1 prism

Which F2 is it? The finder decides

Name Finder Meter Lenses that meter at full aperture
F2 DE-1 None Any (no meter)
F2 Photomic DP-1 CdS, needle Lenses with the coupling prong (“rabbit ears”)
F2S Photomic DP-2 CdS, LED arrows Prong lenses
F2SB Photomic DP-3 Silicon, +/o/− LEDs Prong lenses
F2A Photomic DP-11 CdS, needle AI lenses
F2AS Photomic DP-12 Silicon, +/o/− LEDs AI lenses

The finder’s model number is engraved on its underside next to its serial number. Finders are swapped between bodies all the time, so check the head, not the listing title.

Most buyers are happiest with the F2A (DP-11) or F2AS (DP-12), since they read modern AI lenses directly. Stephen Gandy at CameraQuest calls the AS finder easily the F2’s best metering head. The plain DE-1 F2 has no meter at all, but it’s light, simple, and nothing can fail in it.

Battery

The batteries sit in the body’s base plate, not the finder. The F2 takes two 1.5V SR44 or LR44 cells. Sover Wong, a specialist F2 repairer, says a 3V 1/3N lithium also works. The body itself needs no battery. Only the Photomic finder’s meter uses it.

Which chemistry to use:

  • SR44 silver oxide is the best choice for the DP-1 and DP-11, whose meters are sensitive to voltage. Alkaline LR44s lose voltage steadily as they discharge, which can shift these meters.
  • The DP-2, DP-3, and DP-12 aren’t voltage sensitive. Sover Wong reports they read accurately from 3V down to 2.3V.
  • 1/3N lithium is less prone to leaking and keeps longer, which is why Sover Wong prefers it.

Take the cells out for storage. Sover Wong reports finding internal corrosion from battery leakage in over 80% of the F2s he sees.

Known issues

Meter problems in the finder. A metered finder that won’t read is a separate repair from the body. The classic DP-1 fault is a jumpy or erratic needle. It’s usually an intermittent contact on the resistor ring inside the finder, especially the ground brush underneath it. The documented fix is to clean the ring and contacts, not lubricate them. Body-to-finder contacts can also need cleaning.

Battery corrosion. Leaking cells in the base can corrode contacts and wiring. Look in the chamber before buying.

Leaving the meter on. The CdS heads drain batteries if left switched on. On the F2, the advance lever sitting out from the body is the meter’s on position. Push it in when you’re done. The F2 manual confirms the meter switches on when the lever moves to its 20° standoff position.

Mismatched or wrong lenses. On a DP-1, DP-2, or DP-3, a lens without the coupling prong won’t meter at full aperture. That covers Series E and most AF lenses. Never mount IX-Nikkor (APS) lenses on any F2, since they can hit the mirror.

Light seals. Sticky or crumbling foam is normal at this age and cheap to replace.

What to check on a used F2

  1. Identify the finder. Check the engraving on its underside and match it to the table above.
  2. Meter with fresh cells. Fit two SR44s in the base. Point the camera at a light, then cover the lens. The needle or LEDs should respond smoothly.
  3. Jumpy needle test. Turn the aperture ring and shutter dial slowly. The needle should move smoothly, without flicking or dropping out.
  4. Shutter. With the back off, fire at 1s, 1/2, and 1/2000. The titanium curtains should look smooth, with no dents or creases. The slow speeds should sound even.
  5. Battery chamber. Look for green or white crust.
  6. Lens coupling. On a DP-1, DP-2, or DP-3, make sure the lens has the coupling prong on its aperture ring.
  7. Seals. Remove the back and look at the foam.

Collectible variants

Several special versions exist: the F2T (titanium, 1978–1980), the F2H (high-speed, with a fixed pellicle mirror and a 1/1000 top speed), the F2 Data, and the F2A 25th Anniversary. The Anniversary was an importer’s edition, not authorized by Nikon. These are priced for collectors, not shooters. If a listing claims one, verify it carefully.

Used prices

Working copies (F2 Photomic (DP-1 finder), body or kit) sold on eBay US for about $180–$302 from Aug 22 to Nov 20, 2026. That is the middle half of 74 sales, item price before shipping, with parts-only and as-is listings left out.

Who it’s for, and alternatives

Good fit: people who want a mechanical pro camera that can be repaired, and who like changing finders.

Less good: anyone who wants light weight, auto exposure, or a camera that meters any lens without thinking about it.

  • Nikon FM2: smaller and lighter, also mechanical, with a faster 1/4000 shutter and a built-in meter. It needs AI lenses. See our Nikon F2 vs FM2 comparison.
  • Nikon FM: the smaller mechanical body of the same era, with a 1/1000 top speed and a built-in LED meter. It meters AI lenses at full aperture and older non-AI lenses stopped down.
  • Nikon F3: the F2’s successor, with aperture-priority auto and an electronic shutter.
  • Olympus OM-1: a much smaller mechanical SLR.

FAQ

Does the Nikon F2 need a battery? Only for the metered finder. The body fires at every speed without one.

What battery does the Nikon F2 Photomic take? Two SR44 or LR44 cells in the base plate, or one 3V 1/3N lithium. Use silver oxide (SR44) for the DP-1 and DP-11.

Which Nikon F2 finder is best? For most shooters, the DP-12 (F2AS). It reads AI lenses and has a silicon cell and LED display. The DP-11 (F2A) is the AI version of the original needle meter.

What’s the difference between the F2 Photomic and F2A? The finder. The Photomic’s DP-1 needs prong lenses, and the F2A’s DP-11 reads AI lenses directly.

Can I use AI lenses on an F2 Photomic (DP-1)? AI and AI-S Nikkors have the coupling prong, so they work. Lenses without a prong, like Series E or most AF lenses, won’t meter at full aperture on a DP-1.

How do I tell which F2 I have? Look at the engraving on the underside of the finder. DE-1, DP-1, DP-2, DP-3, DP-11, or DP-12 tells you the model.

Related cameras

Guides

Sources

  1. Nikon F2 — Wikipedia
  2. Nikon F2 — Camera-wiki.org
  3. Nikon F2 Finders — Stephen Gandy, CameraQuest
  4. Batteries — Sover Wong F2 repair
  5. Nikon DP-1 meter adjustment and cleaning procedure
  6. Nikon F2 Used Price Guide and Checklist — All But New
  7. Nikon F2 Photomic instruction manual, film advance and meter switch — ManualsDir
  8. Debut of Nikon F3 — Nikon Camera Chronicle

Last reviewed Nov 20, 2026.