Is the Nikon FM worth buying?
Yes, if you want a small, all-metal mechanical SLR and don’t need speeds above 1/1000. The FM’s shutter runs from 1s to 1/1000s and B with no battery; the cells only power the LED meter. It’s the first of Nikon’s compact FM/FE family, on the same basic chassis as the FM2 and FE2, and it was a common backup body for professionals shooting the F2 and F3.
It has one advantage over the FM2 and FE2: it can take pre-1977 non-AI lenses. Flip the coupling lever up and you can mount and meter (stopped down) almost any Nikkor back to the late 1950s, which the later bodies can’t do without a lens conversion.
The trade-offs: 1/1000 top speed and 1/125 flash sync (the FM2 doubles both), a fixed focusing screen, and manual exposure only. Most problems are age-related and in the meter circuit, not the shutter.
Buy one if you want a durable, battery-independent Nikon and you’re happy with 1/1000, or you own older non-AI lenses. Skip it if you want auto exposure. Look at the FE2 instead.
Key specs
| Spec | Nikon FM |
|---|---|
| Type | 35mm SLR |
| Made | 1977–1982 |
| Mount | Nikon F; AI at full aperture, non-AI stopped down |
| Shutter | Vertical metal-bladed focal-plane (Copal), fully mechanical, 1s–1/1000s + B |
| Flash sync | 1/125s; hot shoe and PC socket; no TTL flash |
| Exposure | Manual only |
| Meter | 60/40 center-weighted GaAsP photodiode; + o − LEDs; EV 1–18 (ASA 100, 50mm f/1.4) |
| Film speed | ASA 12–3200 (manual) |
| Finder | Fixed pentaprism, 93% coverage; fixed split-image/microprism screen; shows shutter speed and aperture (ADR) |
| Other | Depth-of-field preview, multiple-exposure lever, self-timer (about 8–14s) |
| Battery | 2 × SR44/LR44, or 1 × 1/3N lithium (meter only) |
| Accessories | MD-11 / MD-12 motor drive (about 3.5 fps), MF-12 data back |
| Size / weight | 142 × 89.5 × 60.5mm, 590g body |
Film speed range: Nikon’s manual and camera-wiki give ASA 12–3200; Wikipedia says 12–4000. We use the manual’s figure.
Shutter: Nikon’s own history says the FM uses a Copal CCS-M square-type (vertical-travel) metal-bladed shutter, as camera-wiki and All But New describe. Wikipedia says titanium blades, but Nikon dates its honeycomb titanium blades to the FM2 in 1982, so we don’t repeat that.
In-between speeds: camera-wiki notes that the shutter dial works between marked settings. Halfway between 1/60 and 1/125 gives about 1/90. Handy for slide film.
How the meter works
Pull the film-advance lever out to its stand-off position (about 30°) and a red dot appears: the meter is on. Push the lever flush to the body to turn it off and lock the shutter release.
Three LEDs on the right of the finder show five states, per Nikon’s manual:
- + alone: over by more than 1 stop
- + and o: over by 1/5 to 1 stop
- o alone: correct
- o and −: under by 1/5 to 1 stop
- − alone: under by more than 1 stop
That’s finer than it sounds: two lit LEDs tell you you’re close. The finder also shows the shutter speed and, with AI lenses, the aperture through a small window.
Battery
For more detail, see our Nikon FE, FE2 and FM battery page.
The FM takes two 1.5V SR44 (silver-oxide) or LR44 (alkaline) button cells stacked in the base, or one 3V 1/3N lithium cell. Unscrew the cover with a coin.
- Battery check: pull the advance lever out. If an LED lights, the cells are good. If nothing lights, check the cells’ seating and replace them.
- Without batteries: everything works except the meter, at every speed.
- Storage: Nikon’s manual says to remove the cells if you won’t use the camera for a long time.
- Battery drain: if the LEDs stay lit with the lever flush, the meter switch isn’t opening and will drain fresh cells. See below.
Known issues
The FM rarely fails outright. Problems come from age and storage:
Dead meter with fresh cells. A Photrio thread traces one case to a wire that had corroded off the battery contact, under the bottom plate, even though the battery chamber looked spotless. The same thread suggests first working the AI coupling lever back and forth to revive a balky meter.
Meter won’t switch off. One Photo.net owner’s FM meter stayed on with the lever pushed in. The advance lever is the meter switch, so worn or shorted switch contacts drain the cells. A repair, often a simple one.
Slow speeds hanging. Old lubricant can make 1s and 1/2 hang. All But New suggests a back-open video at 1s, 1/2 and 1/1000 before you buy.
Early-body motor-drive lock-up. Bodies made before about 1979 have a knurled collar around the shutter button that switches the meter for motor-drive use. Turning it in the wrong order with an MD-11 or MD-12 attached could jam the camera until the drive was removed and reset. Late FMs dropped the collar. Irrelevant if you won’t use a motor drive.
Broken FRE. Ken Rockwell says the long-term risk for the whole FM/FE family is the “Functional Resistance Element,” which passes the aperture setting to the meter. He says there are no new parts. If it breaks, the camera still works but the meter doesn’t.
Light seals. Expect to replace them on an unserviced body.
What to check on a used FM
- Meter on. Fit fresh SR44s and pull the advance lever out. LEDs should light.
- Meter response. Point at a light, then cover the lens. The LEDs should step from + through o to −.
- Meter off. Push the lever flush. The LEDs must go out.
- AI lever. With the lens off, flick the coupling lever on the mount. It should spring back quickly.
- Shutter. With the back open, fire at 1s, 1/2 and 1/1000 toward a light. Slow speeds shouldn’t hang; the slit at 1/1000 should look even.
- Early or late. Look for the knurled collar around the shutter button. It only matters with a motor drive.
- Seals and battery chamber. Check for gummy foam and green or white corrosion.
Using non-AI lenses
This is the FM’s party trick. To mount a pre-AI Nikkor, press the small button beside the mount and flip the AI coupling lever up out of the way. Meter by pressing the depth-of-field preview lever to stop the lens down to the taking aperture, then adjust until the o LED lights. Remember to flip the lever back down before mounting an AI lens.
AI, AI-S, Series E and AF Nikkors with an aperture ring meter normally (AF lenses focus manually). G-type lenses have no aperture ring and don’t work properly. Never mount IX-Nikkor (APS) lenses or the old 1960s fisheyes that need mirror lock-up: their rear elements will hit the mirror.
FM vs FM2
| FM | FM2 / FM2n | |
|---|---|---|
| Speeds | 1s–1/1000s | 1s–1/4000s |
| Flash sync | 1/125s | 1/200s (FM2), 1/250s (FM2n) |
| Non-AI lenses | Yes, with stop-down metering | No, AI only |
| Focusing screen | Fixed | Interchangeable |
| Years | 1977–1982 | 1982–2001 |
Choose the FM2 if you want the faster shutter and sync, interchangeable screens, or a later body with less age on it. Choose the FM if 1/1000 is enough, you have non-AI lenses, or you’d rather spend less: in fall 2026, working FM bodies sold on eBay for roughly a third of what FM2n bodies fetched (see Used prices below and on the FM2 page).
Who it’s for, and alternatives
Good fit: anyone learning manual exposure, shooting in the cold or away from batteries, or using old non-AI Nikkors.
Not ideal: anyone who wants auto exposure, fast flash sync, or a top speed above 1/1000.
- Nikon FM2: the successor, with 1/4000 and 1/250 sync. AI lenses only. See our FM vs FM2 comparison.
- Nikon FE: the FM’s twin with aperture-priority auto and a two-needle meter; it also takes non-AI lenses via a flip-up coupling lever. Electronic, so only M90 (1/90s) and B work without batteries.
- Nikon FE2: aperture priority, 1/4000 and TTL flash, but only M250 and B without batteries.
- Nikon F2: the pro body of the era. Bigger and heavier, with interchangeable finders.
- Nikon FM10: a much later Cosina-made mechanical Nikon with 1/2000s, lighter and cheaper but with a plastic shell. AI lenses only.
- Olympus OM-1 and Pentax MX: the FM’s mechanical rivals, both smaller. The OM-1 needs a 1.35V mercury-cell substitute; the MX has a five-LED meter on two SR44 cells and a slower 1/60s flash sync.
- Minolta SRT 101: older and mechanical, with the same 1/1000 top speed and a PX625 battery problem.
Used prices
Working copies (body only) sold on eBay US for about $81–$150 from Aug 22 to Nov 20, 2026. That is the middle half of 32 sales, item price before shipping, with parts-only and as-is listings left out.
FAQ
Does the Nikon FM need a battery? Only for the meter. Every speed from 1s to 1/1000 and B works without one.
What battery does the Nikon FM take? Two SR44 or LR44 button cells, or one 3V CR-1/3N lithium cell.
How do I turn the meter on? Pull the film-advance lever out until the red dot shows. Push it flush to turn the meter off.
Can the Nikon FM use non-AI lenses? Yes. Flip up the coupling lever beside the mount, then meter stopped down with the depth-of-field preview.
Nikon FM vs FM2: what’s the difference? The FM2 has a 1/4000 top speed, faster flash sync and interchangeable screens, but needs AI lenses. The FM stops at 1/1000 and 1/125 sync, and takes non-AI lenses.