Skip to content
lastroll

Yashica · rangefinder · 35mm

Yashica Electro 35: Is It Worth Buying? Battery Fix, Pad of Death, Models and What to Check

Yashica Electro 35 buyer's guide: the 45mm f/1.7 aperture-priority rangefinder, replacing the mercury battery, the 'pad of death', which model to buy, and a checklist.

Reviewed Nov 20, 20267 min read

Is the Yashica Electro 35 worth buying?

Yes, if you want a fast-lens rangefinder that handles exposure for you, and you buy one with a working “pad.” The Electro 35 pairs a sharp 45mm f/1.7 lens with a coupled rangefinder and an electronic shutter that times itself to the light, from about 30 seconds to 1/500s, with no steps. You set the aperture and focus; the camera does the rest. It’s one of the cheapest ways to get an f/1.7 lens with rangefinder focusing.

Know three things first. It’s aperture-priority only: you can’t choose a shutter speed, apart from B and 1/30s for flash. It needs a battery for everything except a fixed 1/500s, and the original mercury cell is long gone. And it’s big and heavy for a fixed-lens camera, about 750g. The best-known fault, the “pad of death,” is common but repairable.

Buy one if you like aperture priority, want an f/1.7 lens for low light, and don’t mind the size. Skip it if you want manual shutter speeds or something pocketable. The Olympus Trip 35 is smaller and battery-free, and the Canonet QL17 is a smaller fast-lens rangefinder.

Key specs

Spec Yashica Electro 35 (all G-series)
Type 35mm coupled rangefinder, fixed lens
Introduced 1966
Lens 45mm f/1.7 Yashinon (Color Yashinon from the G), 6 elements in 4 groups, 55mm filter
Close focus 0.8m (2.6 ft)
Shutter Copal Elec electronic leaf shutter, stepless, about 30s–1/500s; B
Exposure Aperture priority only; flash setting at 1/30s
Meter CdS cell on the body
Warnings Red lamp (overexposure) and yellow lamp (slow speed) in the finder and on top
Flash PC socket on all; hot shoe only on GSN and GTN
Battery 5.6V mercury originally; 6V replacements with adapter
Size / weight About 140 × 90 × 75mm, 750g without battery or film

Production numbers are large but uncertain. Camera-wiki estimates more than 5 million across the series, while one long-form review gives about 8 million.

How it works

Pick an aperture and half-press the shutter button. If the light needs a speed faster than 1/500s, a red lamp lights; open less (higher f-number). If the speed will be slower than 1/30s, a yellow lamp lights, warning of camera shake; use a tripod or open up. No lamp means the exposure is in the hand-holdable range. The camera fires either way.

The shutter stays open until enough light has reached the film, so it can make long, correct exposures in dim light, up to about 30 seconds according to Wikipedia.

Battery: replacing the 5.6V mercury cell

The original manual calls for a 5.6V mercury battery (it names the Mallory TR164 and Eveready E164). That cell is the PX32 (same as the TR164 and E164), and Ausgeknipst lists it for the original and every G-series model. Camera-wiki’s “PX23” looks like a typo; no other source uses it. Mercury cells are no longer sold, so you have three options:

Option Notes
New-production PX32A or PX32S (6V) Drop-in size, no adapter. Contax 139 Resource reports these back in production from a UK maker.
4LR44 / PX28A, 4SR44 or PX28L in an adapter Shorter and thinner than the original, so it needs an adapter or spacer. Adapters are widely sold.
Four LR44/SR44 button cells in an adapter Same 6V. Feuerbacher used a homemade cardboard and foil adapter.

Two cautions. First, the 6V replacements are a little higher than the original 5.6V. Feuerbacher reports that the camera works properly anywhere between about 4.6V and 6.5V, so this isn’t a problem for exposure. Second, the Contax 139 Resource tested a 6V alkaline PX28A and found its voltage dropped to about 3.7V under load, below the 3.9V the service manual gives for the battery check lamp. The camera still exposed correctly, but the check lamp didn’t light. Silver-oxide and lithium cells held up better in that test.

How to check it: press the small red button on the back. The green lamp should light. If it doesn’t with a fresh cell, try a different chemistry before assuming the camera is faulty.

Without a battery the shutter fires at 1/500s on every setting.

Our Yashica Electro 35 battery page compares the replacements and the test voltages in detail.

Known issues

The “pad of death.” Inside the shutter-release mechanism a small rubber pad cushions a spring-loaded slider that resets when you wind on. After decades the rubber turns to crumbs, and the camera stops working properly, especially its metering and timing. Feuerbacher lists the symptoms:

  • Inconsistent shutter behavior, especially at long exposures. The shutter may stay open until you let go of the button, like B.
  • No resistance for the first few millimeters of the shutter button travel.
  • No distinct “clunk” when you wind on.

It’s a well-documented repair: the camera has to be partly taken apart, but published guides show how, and the replacement is a small piece of hard rubber.

Battery compartment corrosion. A camera that once held a leaking cell may have corroded contacts.

Light seals. Wikipedia notes the foam seals around the film door break down over time and are fairly easy to replace.

What to check on a used Electro 35

  1. Battery check. Bring a 6V cell and an adapter if you can, or ask the seller to show the green lamp with a fresh battery.
  2. The clunk. Wind the lever. A clear “clunk” is a good sign the pad is intact.
  3. Shutter feel. Half-press slowly. There should be some resistance before the release engages.
  4. Long exposure. In a dim room at f/16, fire. You should hear the shutter open, stay open, and close on its own. If it only closes when you let go, suspect the pad.
  5. Lamps. At f/1.7 toward a bright window, the red lamp should light. At f/16 in a dark corner, the yellow one should.
  6. Rangefinder. Focus on something far away. The two images should merge at the infinity mark. Check the patch is visible and not too faint.
  7. Lens, seals and compartment. Look through the lens with a light for haze and fungus, press the door seals, and look for green or white corrosion on the battery contacts.

Which model to buy

The cameras are very similar across the run, and the lens didn’t change apart from its name. The differences:

Model Introduced Finish Notes
Electro 35 1966 Chrome Original; lower top film speed
Electro 35 Professional 1966 Black Rare
G 1968 Chrome “Color Yashinon” lens name
GT 1969 Black
GS 1970 Chrome Film speed up to ASA 1000
GSN / GTN 1973 Chrome / black Adds a hot shoe

Sources disagree on details. Camera-wiki says the “G” stands for gold-plated contacts, while Wikipedia says gold plating arrived with the GS and GT. They also give different film speed ranges for the early models.

When did production end? One review says the series ran until 1977. Camera-wiki’s production table ends the GSN at 1974 with a question mark.

Which to buy? A GSN or GTN if you want a hot shoe for flash. Otherwise, buy the best-working camera you can find; condition matters far more than the letters.

Who it’s for, and alternatives

Good fit: anyone who shoots aperture priority, wants a fast lens for low light, and likes rangefinder focusing.

Less good: anyone who wants manual shutter speeds, a small camera, or a camera that works fully without a battery.

  • Olympus Trip 35: much smaller and battery-free, but zone focus, two speeds and f/2.8.
  • Canonet QL17: a smaller rangefinder with a fast lens and shutter priority.
  • Olympus 35 RC and Konica C35: much smaller rangefinders (about 400g) with f/2.8 lenses. The 35 RC adds shutter priority and manual; the C35 is auto only. Both stop at 1/15 or 1/30 on the slow end.
  • Contax G2: if you want a rangefinder-style camera with interchangeable Zeiss lenses and autofocus, at many times the price.

Used prices

Working copies (any Electro 35 model) sold on eBay US for about $40–$115 from Aug 22 to Nov 20, 2026. That is the middle half of 118 sales, item price before shipping, with parts-only and as-is listings left out.

FAQ

What battery does the Yashica Electro 35 take? It was designed for a 5.6V mercury cell. Today, use a 6V PX32A or PX32S, or a 4LR44, 4SR44 or PX28L in an adapter.

Does the Electro 35 work without a battery? Only at 1/500s. The meter, the lamps and all the timed speeds need a battery.

What is the Yashica Electro 35 “pad of death”? A small rubber pad in the shutter-release mechanism that crumbles with age. Symptoms are erratic long exposures, a shutter that behaves like B, and no clunk when you wind on. It can be replaced.

Can I set the shutter speed manually on an Electro 35? No. It’s aperture-priority auto only, plus B and a 1/30s flash setting.

Related cameras

Sources

  1. Yashica Electro 35 instruction manual — Butkus.org
  2. Yashica Electro 35 — Camera-wiki.org
  3. Yashica Electro 35 — Wikipedia
  4. Pad replacement in a Yashica Electro 35 — M. Feuerbacher
  5. Yashica Electro 35 GSN — M. Feuerbacher
  6. Replacement battery for Yashica Electro 35 series — Contax 139 Resource
  7. Yashica Electro 35 GSN Film Camera Review — My Favourite Lens
  8. Which battery replaces the PX32? — Ausgeknipst
  9. Canonet G-III QL17 — Wikipedia

Last reviewed Nov 20, 2026.